Simultaneously press the retaining clips outward to unlock the DIMM. Do not overtighten the screws! If the hard disk was already formatted on a previous system, the setup BIOS may detect incorrect parameters. Plug the power cord and turn ON the computer. Click F i l e from the menu, then select F o r m a tt. Do this last option only if the first two failed. Insert a formatted, high density 1.

Uploader: Gusho
Date Added: 16 December 2014
File Size: 13.27 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 95695
Price: Free* [*Free Regsitration Required]

Connect the chassis power LED cable to this connector.

For optimum compatibility, we recommend that you obtain memory modules from eethernet same vendor. Information to prevent injury to yourself when trying to complete a task.

After selecting this option, a confirmation appears. Boot the system in DOS mode using the bootable floppy disk you created earlier. Loads overclocking profiles with optimal parameters for stability when overclocking. Make sure to etherndt the partition of the Primary IDE hard disk drives to active. Make sure that the fan and heatsink assembly perfectly fits the retention mechanism If the fan is not connected to the motherboard, the field shows 0. Product Introduction This chapter describes the motherboard features and the new technologies it supports.


Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. The Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.


Doing so can damage the motherboard. K8N4-E System panel connector The sytem panel connector is color-coded for easy connection.

You can also find this information on the inside front cover of this user guide. Locked Retaining Clip 1. This section explains how to configure your system using this utility.

If the system becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability. Do not place the product in any area where it may become wet. The following figure shows a graphics card installed on the PCI Express x16 slot.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: This item is not configurable. Discard Changes This option allows you to discard the selections you made and restore the previously saved values.


Select Y E S to load default values.

ASUS K8N4-E Deluxe – motherboard – ATX – Socket 754 – nForce4 4X

You can also restart by turning the system off and then back on. Doing so can cause system boot failure! We recommended to install the memory modules first before installing a PCI Express x16 card. B I N and save it to a floppy disk.

Asus computer hardware – motherboard user manual pages. Hardware monitoring errors can occur if you fail to plug this connector. The keys in the legend bar allow you to navigate through k84n-e various setup menus. If you detect any damage, contact your dealer immediately. Removing the cap will cause system boot failure! The DIMM might get k84n-e when it flips out with extra force. This prevents incorrect insertion when you connect the IDE cable.

ASUS Update utility 2.

K8n4-e deluxe user’s manual for english version e pages.

Start the discussion

Leave a Reply

Your email address will not be published. Required fields are marked *